Link-systems OmniLink - Feed Interface Manual de usuario descargar pdf (Pagina 10)

OmniLink 5000 Feed Manual December 13, 1999

2.4 Manual Rev 2.3

2.5 Coe ServoMaster Interface

The connection to a Coe ServoMaster Feed uses

two cables - an adapter cable to go from a telephone

type connector on the operator interface of the

ServoMaster to a DB-9 connector, and a longer

cable to go from the DB-9 connector to the Link

operator terminal.

Table 2.3

Coe ServoMaster Connections

(Adapter Cable) Link PN 107921

DB-9

Female

Function Coe

Telephone

Jack

Pin 1

(GND)

Ground Pins 3 and 4

Pin 2

(RXD)

Transmit data to

feed

Pin 5

Pin 3

(TXD)

Receive data

from feed

Pin 2

Table 2.4

Coe ServoMaster Connections

(Main Cable) Link PN 105721

OmniLink

Feed Port

Function / Color DB-9

Male

Pin 1

(GND)

Ground (WHITE) Pin 5

Pin 2

(RXD)

Receive data from

feed (BLACK)

Pin 3

(TXD)

Transmit data to

feed (RED)

Pin 2

Notes:

 The telephone jack is located on the back of the

Coe operator interface terminal

 The feed communications settings (as set in the

Coe operator terminal) should be 9600 Baud, 7

data bits, Odd parity, 1 stop bit.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 39 40

Comentarios a estos manuales

Sin comentarios

Link-systems OmniLink - Feed Interface Manual de usuario Pagina 10

Comentarios a estos manuales

Relacionado con productos y manuales para Instrumentos de medición Link-systems OmniLink - Feed Interface