Link-systems OmniLink - PLC Interface Manual de usuario descargar pdf (Pagina 36)

June 5, 2000 Man ual Rev 1 .0 5.9

Meaning:

The numeric “current status” code for the “A” side of the Press Control. A zero for this value

indicates the press is ready to run. See parameter 082 for a command to get the actual text

description of this code.

Section 5.7.12 Parameter 012 - Press Control “B” Current Status Code

Value:

Standard Numeric

Meaning:

The numeric “current status” code for the “B” side of the Press Control. A zero for this value

indicates the press is ready to run. See parameter 083 for a command to get the actual text

description of this code.

Section 5.7.13 Parameter 013 - Press Control “A” Reason For Last Stop Code

Value:

Standard Numeric

Meaning:

The numeric “reason for last stop” code for the “A” side of the Press Control. See parameter 084 for

a command to get the actual text description of this code.

Section 5.7.14 Parameter 014 - Press Control “B” Reason For Last Stop Code

Value:

Standard Numeric

Meaning:

The numeric “reason for last stop” code for the “B” side of the Press Control. See parameter 085 for

a command to get the actual text description of this code.

Section 5.7.15 Parameter 015 - Auxiliary Message Selector Value

Value:

Standard Numeric

Meaning:

The value of the parallel auxiliary messages selector port. This is a seven bit port on the back of the

OmniLink OIT. This value can be 0 to 127.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 52 53

Sin comentarios

Link-systems OmniLink - PLC Interface Manual de usuario Pagina 36