Link-systems LinkNet II Manual de usuario descargar pdf (Pagina 80)

Figure 7.3: OmniLink (Monochrome) Communications

Configuration Screen

• Push the “CONFIG COMM.” softkey

to display the communications setup

screen, which should look similar to

Figure 7.3 (the port configurations

may vary depending on how the

particular machine is set up and what

options have been installed).

• Use the up and down arrow keys to

highlight “Port 5" and hit the

“CHANGE TASK” softkey until the

description for port 5 reads “Link

Network”.

Figure 7.4: OmniLink (Monochrome) Network Configuration

Screen

• Hit the “CONFIG TASK” softkey and

a screen similar to Figure 7.4 should

appear. Highlight the field for

“Machine Number” and enter the

machine number desired for this

press. If necessary, highlight the

“Baud Rate” field and hit the

“CHANGE SETTING” softkey until

it reads “19200".

• Exit back out to the main screen.

Manual Version 1.1 10/28/2001

7.2

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 98 99

Sin comentarios

Link-systems LinkNet II Manual de usuario Pagina 80